Kongskilde

Pipes - OK

The Kongskilde OK pipe system is ideal for pneumatic and mechanical conveying. The simple and flexible pipe system can be adjusted to suit any specific purpose, resulting in shorter conveying distances and, therefore, the most efficient and economical solutions.

The OK pipe system’s modular design comprises pipes, bends, branches, diverters, cyclones, outlets, etc. The components are assembled quickly and easily using the unique OK quick release couplings. The wide range of OK piping and accessories ensures flexibility and ease of installation on grain bins, silos, and buildings.

When using pneumatic transport systems, bends are most exposed to wear. Kongskilde has therefore introduced the OKX 160 bends of hardened steel, which have a considerably higher wear resistance and therefore a longer lifetime compared to standard bends.

Downloads
Brochures
Manuals

Related solutions

Group Created with Sketch.

Pre-cleaning of grain by weight

A clean crop without impurities and dust is much easier to store safely. By minimizing the content of dust in the grain, less dust will be released to the surroundings in the grain storage.
Read more
Group Created with Sketch.

Pre-cleaning of grain by weight and size

To remove more heavy impurities in the grain, it is necessary to use a screen cleaning process, also for the pre cleaning.
Read more
Group Created with Sketch.

Crop separation

Separation of different types of seeds, i.e. peas and grain, is necessary when these crops are grown mixed together on the same field, and thus mixed when harvested with the combine.
Read more
Group Created with Sketch.

Seed cleaning

A Kongskilde solution will help alleviate the problems with grain infected by fungicides or other unwanted remains sitting on the kernel surface.
Read more
Group Created with Sketch.

Grading of malting barley

Grain is used for various products where the specification of size of the single kernel is a demand criterion. As an example, barley used for malting needs to have kernels above a certain thickness.
Read more
Group Created with Sketch.

Aspiration cleaning at grain dryer discharge

On a wet crop, light material and dust tends to stick to the kernels. As example, when handling corn, bees’ wings (leaves) tend to stick the corn kernel when wet.
Read more

Filling and emptying system for silos (flat bottom)

A conveying solution for filling of siloes can easily be based on pneumatics. It is only the pipes which need to go from ground level to the top filling point of the silo.
Read more

Filling and emptying system for hopper silos

With this pneumatic solution, more hopper silos can be emptied by the use of only one blower.
Read more

Conveying system for grain dryers

Kongskilde offers pneumatic conveying systems for conveying of grain from the pit into wet holding bins, driers, or storage silos; and from the wet holding bin into driers or storage silos; as well as conveying from drier into storage silos.
Read more

Filling and emptying system for on-floor storage

A pneumatic conveying system for filling of on-floor storage can easily be installed everywhere. Such a suction/blowing system is very easy to install with hardly any demands to the building construction itself.
Read more

Residue clean out of silo/on-floor storage

Large silos or storage facilities quite often have a bigger quantity of grain left after emptying using mechanical conveying equipment.
Read more

Loading and unloading of trucks/wagons/ships

The easy and efficient solution for conveying of grain from trucks to railcars is to use a suction blower.
Read more

In-field loading

With this pneumatic conveying solution, you can load the grain directly off the field. The suction blower vacuums the grain up from the field ground.
Read more

Conveying system for screenings (fines)

In various plants, i.e. for seed cleaning, several fractions of grain and waste has to be conveyed separately away from the cleaning machine.
Read more
Group 2 Created with Sketch.

Filling and emptying system for silos (flat bottom)

A high capacity mechanical conveying system to transport grain to and from silos can be based on bucket elevators and chain conveyors.
Read more
Group 2 Created with Sketch.

Filling and emptying system for hopper silos

A high capacity mechanical system can fill and empty bottom hopper silos.
Read more
Group 2 Created with Sketch.

Conveying system for grain dryers

You can mechanically convey grain to and from a continuous flow drier. The system contains an intake pit, bin for wet grain, dryer, and storage silos.
Read more
Group 2 Created with Sketch.

Loading systems for on-floor storages

Kongskilde offers solutions based on a conveyor placed at the bottom of a pit to convey the grain horizontally to the intake of a bucket elevator.
Read more
Group 2 Created with Sketch.

Gentle self-cleaning conveying system for seed grain

Bucket elevators are the gentlest conveying for vertical lifting when conveying seed grain. The grain is carried up vertically in a bucket without any impact to the kernels.
Read more
Group 4 Created with Sketch.

Bulk handling and storage turnkey solutions (Brock)

Whether your on-farm storage consists of a couple of bins with an auger or a whole row of bins with an integrated loading and unloading system Brock bins are the right choice for the job.
Read more