Created with Sketch.
  • Log ind
  • | Dealer Login
  • | Donwloads
  • |
    Created with Sketch.
  • |
  • Gå til Industri websitet
  • Forside
  • /
  • Cases
  • /
  • Håndtering af endeløse kantremser hos producent af slikkepinde – Spanien
Kongskilde Case Story

Håndtering af endeløse kantremser hos producent af slikkepinde - Spanien

Ved anvendelsen af en pneumatisk transportløsning fra Kongskilde er produktivitet og arbejdsmiljø forbedret markant.

The Challenge

This Spanish lollypop producer is part of a world wide company producing confectionary products.

The customer has 4 process machines producing endless trims of waste when packing lollypops. The trims were collected in small binds next to the machine and that created 3 main problems:

  • The time and labour cost needed to handle and remove the waste were too high. The removal of waste required a forklift. This created a liability issue in the production area
  • The look of the production environment with trim waste laying in waste containers was not representative whenever the customer received guests
  • There was a negative impact on the productivity caused by the accumulated waste around each machine
  • The company needed a waste solution that could keep the production area clean and increase production efficiency due minimal line stops

The Solution

  • The pneumatic solution implemented is the well-proven Kongskilde RVS 5000 system combined with the new FC MultiAir 1100S and one MultiCutter. The pipeline is the flexible OK 160 system and the solution is easy to upgrade
  • High flexibility and the modularity means easy setup of the pneumatic conveyor solution which can be accomplished in hours. The pipes mounted in the ceiling liberates space
  • The solution generates a significant low extraction airflow for every machine

The pneumatic solution implemented is the well-proven Kongskilde RVS 5000 system combined with the new FC MultiAir 1100S and one MultiCutter.

The Advantages and Benefits

  • The Kongskilde solution increased productivity as the customer no longer has to stop the machines to empty the waste bins where the endless trims used to be collected
  • Downtime has been reduced by 1.5 hours by automatic and continuous transfer of waste directly out of the production facilities to an outside container
  • Labour cost related to manual waste handling inside the production and adjacent areas has been reduced by 25 %. The liability related to the forklift is no longer a concern
  • More space around the machines improves productivity
  • The factory environment is cleaner as waste is no longer collected in bins around the machines
  • Due to the vertical piping design and use of stainless steel pipes the customer can now perform wet cleaning regularly inside and outside on our trim suction piping
  • Pay-back time is expected to be less than 10 months

Labour cost related to manual waste handling inside the production and adjacent areas has been reduced by 25 %

The Facts

  • Material: Silicon paper, endless trim
  • Number of machines: 4 pcs
  • Number of endless trims: 1 pcs per machine
  • Max. trim width: 20 mm
  • Max. trim speed: 225 m/min.
  • Material thickness: 30-100 g/m2
  • System specifications: Conveying distance: 100 m + 6 x 90°

The max. trim speed is 225 m/min.

The pneumatic solution implemented is the well-proven Kongskilde RVS 5000 system combined with the new FC MultiAir 1100S and one MultiCutter.

Labour cost related to manual waste handling inside the production and adjacent areas has been reduced by 25 %

The max. trim speed is 225 m/min.

Created with Sketch.

Created with Sketch.

Sign in

{{serverStatus.message}}
Glemt password?

Opret profil

{{serverStatus.message}}
Dit password skal indeholde mindst 7 karakterer, med et lille bogstav, et stort bogstav og et tal.
Læs mere
Log ind i stedet for?